Updated: September 2, 2021

6 Best Arc Welding Machines In India (Review & Buying Guide) November 2021

Written by Robin
6 Best Arc Welding Machines In India (Review & Buying Guide) November 2021

Welcome to my blog: Best Arc Welding Machines In India

In the modern world, there are many welding machines available. These are of different types. Some of them are available at affordable prices, and some are expensive. Some of them are also known to be the best in the market. It is very difficult to choose the best welding machine in India. 

Welding Machines are used to do the following:

  • Welding machines used for inert gas metal arc welding (IGMAW or MIG) and/or gas tungsten arc welding (GTAW or TIG) are called wire feed welders or wire-feeders. The wire-feeder holds a spool of wire, from which is drawn out as required for the weld. The wire is fed through a hand-gun style device called a tungsten electrode, which heats up and melts the base metal, allowing the weld to be made. If the electrode is too hot it can damage the weld, so it must be constantly monitored and adjusted to ensure that the correct temperature is maintained throughout the weld.
  • The welding machine will have a constant speed drive which will be set to feed the wire at a pre-set speed, which must not be allowed to change during welding otherwise the quality of the weld will suffer. This pre-set speed is dependent on the size of wire being used and type of metal being welded. The large spools of wire require a slower feed rate than thinner diameter wire, which allows the machine to pull more of the wire through before the spool runs out.
  • The standard sizes of wire spool are 6kg (welding aluminum), 10kg (welding mild steel), 20kg (welding stainless steel), and 25kg (welding nickel alloys and copper). Tapering is used when using thinner diameters of wire in order to control the amount of heat input into the weld. For example, 1.0mm wire requires a much slower feed rate than 0.6mm wire.

Summary- Best Arc Welding Machines In India

Different Types of Welding Machine:

1. Arc welding machines or welding generators: 

These are the most basic type of welder and are commonly used in construction and industry. Arc welding machines use a constant supply of electricity to generate an electric arc between the metal being welded and the electrode.

2. Gas tungsten arc welding (GTAW) machines: 

These use a constant supply of shielding gas and a tungsten electrode to create an arc that melts the metal. The arc is commonly pulsed to improve penetration.

3. Inert gas metal arc welding (IGMAW) machines: 

These use a constant supply of shielding gas and a consumable wire electrode to create an arc that melts the metal. The arc is commonly pulsed to improve penetration. This type of welder can be used to weld all types of metal and is more versatile than the GTAW welder.

Top 10 Best Welding Machine Brands in India

1. Electraweld (India)

2. BMB

3. iBELL

4. GK36

5. Esab India

6. Cruxweld

7. Kemppi

8. Vulcan

9. Premier

10. Rilond

To get the best welding machine in India, you need to know what to look for in a welding machine. In this article, we have reviewed several best welding machines for you. The review & buying guide of these welding machines will help you to decide which one is the best among them all.

Here’s The List Of The Best Arc Welding Machines

1. BMB Technology Arc-200 Amps Inverter Welding Machine
2. iBELL 220A Inverter ARC Welding Machine
3. Shakti Technology 200AInverter Welding Machine
4. GK36 200A ARC200 Welding Machine
5. V&D Tools 220A Inverter Welding Machine
6. BMB Shakti Technology ARC-400 Amps Inverter Welding Machine

BMB Shakti Technology ARC-400 Amps Inverter Welding Machine

View Price On Amazon

BMB Shakti Technology ARC-400 Amps Inverter Welding Machine
BMB Shakti Technology ARC-400 Amps Inverter Welding Machine

The BMB Shakti Technology ARC-400 Amps Inverter Welding Machine is a very popular product for home and industrial use.

It has an output of 400 amps and is suitable for welding rods with a diameter of up to 10 mm. The arc length is adjustable and can be set to a maximum distance of 2.5 mm.

The machine is equipped with thermal overload protection and an arc force limiter, which are designed to protect the arc welding machine. In addition to this, it has a cable connector, which enables the use of an external power supply. Overall this is one of the best welding machines in India.


  • The arc welding machine is very simple to use.
  • It offers high starting performance and has a very robust design.
  • The cables are fitted and have a length of 6 m.
  • The arc welding device can be set very quickly and easily.
  • It can also be transported very easily because it features a very compact design.
  • The arc welding machine is equipped with an arc force limiter and a built-in thermal overload protection, which protects the welding machine from damage.


BMB Technology Arc-200 Amps Inverter Best Arc Welding Machine in India

View Price On Amazon

BMB Technology Arc-200 Amps Inverter Welding Machine (Best welding machine in India)

The BMB Shakti Technology ARC 200N is a machine that is ideal for home use and light work. It is a single-phase, inverter arc welding machine that can weld with both DCEN and DCEP

operating modes. The ARC-200N is easy to operate, portable, and economical. This machine's inverter technology gives more consistent arc characteristics.

This model arc welding machine comes with an adjustable welding current of 0-200 Amp, allowing the user to set the welding voltage according to the thickness of the material being welded. The amperage of the machine can be adjusted in increments of 5 Amp. This flexibility allows you to focus on the task at hand rather than be distracted by unnecessary settings.

The arc voltage (or power) can also be adjusted according to the thickness of the metal being welded. The arc voltage can be adjusted in increments of 5 Volt. This feature allows you to control the intensity of the arc and determine the best settings for your welding project.

The ARC-200N is also equipped with an internal cooling fan for increased cooling efficiency. This feature also allows you to set your own pace during longer welding projects, as it helps to prevent overheating and burnt metal deposits.

The ARC-200N is a single-phase welder that works best on lighter materials such as sheet metals, thin plates, and small sections of steel or iron. This model can weld with both DCEN and DCEP operating modes, giving you greater flexibility when completing your next project.


  • Reduced and compact
  • Strong form yet lightweight
  • Low support
  • A standout amongst other valued welders
  • Inside cooling framework
  • Dependable IGBT technology


  • Warranty just on enrollment
  • Short cable length

iBELL 220A Inverter ARC Best Arc Welding Machine in India 

View Price On Amazon

iBELL 220A Inverter ARC Welding Machine (Best welding machine in India)

Another most confided in brand in the field of metal creation! iBELL inverter Arc welding machine is a quality item that isn't just smaller and compact yet additionally high in effectiveness and execution. This single-stage versatile circular segment welder is an aid to the business. 

It utilizes the most recent technology to take off its exhibition at the same time lessening its upkeep. It surpasses all the necessary business-standard parameters demonstrating its dependability and toughness.

The Arc 220A component and IGBT technology give an advanced and refined wind to the inverter welder. The main explanation iBELL inverter welder takes the second situation on our rundown as it is evaluated somewhat higher than our topper. 

The iBELL inverter welder utilizes a procedure like a power transistor with the exception that IGBT technology acquires a semiconductor to control the voltage applied to its entryway making the machine work all the more productively and rapidly.

The most recent technology makes your welder perfect for high-power and increasingly predominant use. This makes the inverter welder appropriate for manufacturing high-strength metals and castings. 

The principle USP is the far-reaching 2 years warranty spread. The most elevated on this rundown! 


  • Minimal and convenient
  • Hostile to stick capacities
  • Low support
  • Bend power control
  • Dependable IGBT technology


  • Short cable length
  • Evaluated high

Shakti Technology 200A Inverter Best Arc Welding Machine in India

View Price On Amazon

Shakti Technology 200A Inverter Welding Machine  (Best welding machine in India)

This extraordinary family unit item lets you weld like an expert at just a small amount of expense. Shakti technology is known for its capacity hardware and this inverter welding machine denotes a venturesome item to the business. 

Following the iBELL welding machine on our rundown is the ground-breaking single-stage inverter welding machine from Shakti technology.

In addition to the fact that it utilizes the IGBT technology to create metals flawlessly, however, it likewise guarantees a more drawn-out life expectancy through its Arc power component.

Perfect to use with the family unit power supply of 240V, this inverter welder is an unquestionable requirement purchase. 

The protected door bipolar transistor technology alongside the Arc power component guarantees that the inverter changes over to DC power as a yield at the ideal voltage and recurrence for better profitability.

The bundled unit incorporates an inverter tube, a couple of cowhide hand gloves, welding goggles, a welding holder, and an earth clip alongside their individual cables. 

In any case, the inverter welder doesn't accompany a guarantee. Shoppers are required to enlist to increase an extra warranty of a half year on the welding machine. 


  • Minimal, light, and transportable
  • Solid form quality
  • Durable
  • Low upkeep
  • Incredible client assistance
  • Solid IGBT technology


  • In contrast to the machine, cables get warmed rapidly
  • a half year warranty on the enrollment

GK36 200A ARC200 Best Arc Welding Machine in India

View Price On Amazon

GK36 200A ARC200 Welding Machine (Best welding machine in India)

Next up on our rundown is this exceptionally productive welding machine with an inherent inverter by GK36 and organization.

This inverter welder ensures you get a steady voltage-type welding power supply all through your utilization. The present range on this inverter welding machine fluctuates from 20 to 200 A. 

Go with this inverter welder on the off chance that you like a reliable, concentrated, steady and proficient execution.

The machine is exceptionally versatile, on account of its reduced form and plan. An away from the show at the top corner of the machine furnishes you with the privilege of computerized working power. 

To facilitate your activity, the unit incorporates all the standard adornments, for example, a welding holder with 2M long cable, earth clip with a 1M cable, and fitting euro connectors.

The inherent inverter offers an ideal yield voltage running from 20-200A to complete your activity appropriately. This accompanies a year warranty spread. 


  • Minimal and transportable
  • Solid form quality
  • Strong
  • a year warranty
  • Low support

V&D Tools 220A Inverter Best Arc Welding Machine in India

View Price On Amazon

V&D Tools 220A Inverter Welding Machine (Best welding machine in India)

V&D apparatuses inverter welding machines are single-stage machines that join IGBT innovation to consistently change from essential to the optional valve so as to give that ideal yield current to a more drawn-out timeframe.

The Arc power system makes it simpler for the gadget to keep up a predictable voltage yield for a sharp yet stable activity. 

The advanced presentation on the machine gives you an away from the yield power. The welding machine is joined by a holder and an earthing clip with cables around 1.5M long. The snatch handle on the highest point of the machine is a convenient expansion. 

V&D Tools has given this a 6 months warranty spread. 


  • Reduced and transportable
  • Solid form quality
  • Zero to Low support 


  • No, overheat assurance

Buying Guide – Best Arc Welding Machines in India


1. MIG (Metal Inert Gas): This is the most commonly used type of welding machine.

2. TIG (Tungsten Inert Gas): This is a sophisticated type of welding machine that requires great skill to handle.

3. Stick Welding: This is a comparatively simpler type of welding machine but requires some skill to handle.

A MIG welder can be used to weld a wide variety of metals and even non-metals. TIG welding machine is used for welding thin sheets and also for welding non-metals. Stick welding is used for welding scrap materials. 

The type you should choose depends on what you want to weld and which one is within your budget. A stick welder is best suited for welding thicker materials.

Factors to consider while buying the Best Arc Welding Machine in India

1. Arc Welding:

Arc welding is an arc discharge that occurs when a welding electrode or rod is heated to a high temperature.

The heat causes the metal to form an electric arc at the base of the weld, while the shielding gases protect the surrounding material from being oxidized. The electric arc heats the workpiece to the melting point and fuses the two pieces being welded.

2. Inverter and Conventional Welding Machines:

A conventional power supply or inverter power supply can be used with a MIG welder. 

The main difference between them is that the former will not turn on unless it detects a weldable metal in the work area, while the latter will power up regardless of what is in the work area. 

Both types of welders have advantages and disadvantages when they are used with particular materials; it is common to use both kinds in a shop in order to accommodate all of the materials that are worked on.

3. Input Power:

Input power is the maximum amount of power that a welding machine can consume, which is measured in volts (V) and amperage (A). This is important because it will affect what type of power supply you will need for it and what other pieces of equipment it can run alongside.

4. AMP Rating:

The amp rating is the maximum current output of the welding machine. A welding machine's capacity to generate heat will be determined by its amp rating, which is measured in amps (A). The larger the amp rating, the greater the amount of current a machine can output.

5. Welding Rods:

Welding rods are available in different diameters (called "gauges"), including .030, .045, .065, .080, .095, .120, or .125 inches. The smaller the gauge number, the thicker and heavier the rod. 

The welding rod's size will determine how big of a weld you can make and how strong it will be; a bigger gauge rod will make a thicker weld that is more durable than a thinner one. A welder's capacity to use any particular welding rod size will depend on its size and amp rating capacity.

6. Budget:

Welding machines are available for every budget range imaginable, but even within a single price range, there are many options to choose from. In India, you can get the Best Welding Machine in India from Rs 20500/- to Rs 30000/-.

Best Welding Machine In India-FAQ

1. Why Do We Recommend This?

We have selected for you the most top-rated welding machine for both professional and home use. We have reviewed extensively about the products and have gone through the feedback and reviews from hundreds of customers to ensure that we recommend the best product for you without any doubt.

2. What is ARC Welding?

The ARC or Alternating Current is a very powerful form of welding current and is capable of producing very strong and even welds on all types of materials, including low carbon steel, stainless steel, nickel alloys, copper, aluminum, brass, titanium, and many others. 

The alternation between positive and negative currents in this form of welding allows for high levels of control over the weld pool and also allows for higher penetration rates than direct current (DC) welding methods such as MMA (Metal Metal).

3. How To Choose The Top Welding Machine?

1. Selecting the type of welding machine depends on your intended usage, what you will be welding, and also on your budget. For example, if you are working on a constant basis and the type of metal that you will be welding is not important, then it would be cheaper to get a MIG Welder.

2. If you are working on a non-constant basis and you will be welding different types of metal, then you should consider getting a TIG Welder.

3. Price: This is an important factor to consider when choosing the best welding machine for you. The price of the product is usually proportionate to the brand, the quality, and the features that it comes with.

4. The arc length: The arc length refers to how close the electrode is positioned to the base material. A longer arc length often leads to a better weld because it gives the arc more time to penetrate the base material as compared to a short arc length which is often used for welding thin materials.

5. Duty cycle: The duty cycle of a product refers to the percentage of time that the machine can be used before it needs to be cooled down. A low duty cycle means that the machine is suitable for lighter duty applications while a high duty cycle means that the machine is suitable for heavy-duty applications.


We hope this guide has helped you choose the right welding machine for your needs. If you have any questions or comments, please leave them below and we will get back to you as soon as possible.

Written by Robin

Leave a Reply

Your email address will not be published. Required fields are marked *

More From
bagittoday.com participates in the Amazon Associates Associates Program, an affiliate advertising program designed to provide a means for sites to earn commissions by linking to Amazon. This means that whenever you buy a product on Amazon from a link on here, we get a small percentage of its price.
Bagittoday USABagittoday India
Bagittoday India
A202 Babylon Towers, VIP Chowk, Raipur, C.G.
Privacy PolicyTerms Of Use